TNZ5UNS4T65 is 1-port 100G universal line service processing board.
With one 100G-DWDM-C ext.-T65-SM-TCFP TNF1C1CFPT65
Applied to Huawei OSN 1800V.
Supports hybrid transmission of OTN, SDH and packet services, and functions such as Layer 2 switching, OTN ports, and SDH overhead processing.
Supports hybrid transmission of OTN, SDH and packet services with a maximum bandwidth of 100 Gbit/s. Functions supported by the UNS4 board vary depending on the signals received.
Supports Tributary SNCP, ODUk SNCP, intra-board 1+1 protection (when working with the OLP board).
Supports ESC function, ESC communication.
Supports the PRBS function on the WDM side.
Supports Electrical-layer ASON, Optical-layer ASON.
Supports outloops on VC-12, VC-3 channels, and supports inloops/outloops on VC-4 channels.
Supports Outband DCN.
Supports IEEE 1588v2.
Supports 1:1 PW FPS, 1:1 PW APS.
Supports MC-LAG, LPT, Packet SNCP, MC-PW APS, MRPS, LLDP, HQoS, Inband DCN, IGMP Snooping.
TNZ5UNS4T65 is a 1-port 100G universal line service processing board applied to Huawei OSN 1800V. It supports hybrid transmission of OTN, SDH and packet services with a maximum bandwidth of 100 Gbit/s. TNZ5UNS4T65 comes with one TNF1C1CFPT65 module, if you need other specification module, please contact [email protected]
|There are ports on the front panel of the board.
80 x ODU0<->ODU4<->OTU4
40 x ODU1<->ODU4<->OTU4
10 x ODU2<->ODU4<->OTU4
10 x ODU2e<->ODU4<->OTU4
2 x ODU3<->ODU4<->OTU4
8 x STM-16<->8 x ODU1<->1 x ODU4<->1 x OTU4
2 x STM-64<->2 x ODU2<->1 x ODU4<->1 x OTU4
|Packet||A maximum of 100 Gbit/s packets<->80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4<->1 x OTU4|
|Regeneration mode||1 x OTU4<->1 x OTU4|
OTN services: Supported (ODU0/ODU1/ODU2/ODU2e/ODU3/ODUflex)
SDH services: SDH clock synchronization is supported when SDH virtual ports are configured.
Packet services: Physical-layer (ODU0/ODU1/ODUflex) clock synchronization is supported when packet virtual ports are configured.
|Specifications (OTN functions)|
Supports conversion of the following signals:
80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4<->1 x OTU4
Supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, and ODUflex signals.
|Cross-connect functionality||Implements the following service grooming when working with cross-connect boards: 80 x ODU0/ODUflex, 40 x ODU1, 10 x ODU2/ODU2e, 2 x ODU3, 1 x ODU4.|
Supports OTU4 interfaces on the WDM side.
Adopts the frame formats and overhead processing methods defined in ITU-T G.709.
Supports the SM function at the OTU4 layer.
Supports the PM and TCM functions at the ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer, and non-intrusive monitoring of PM and TCM overheads.
|Specifications (SDH functions)|
|Service processing||Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-16c, and VC-4-64c services. (VC-4-4c, VC-4-16c, and VC-4-64c services are concatenated services.)|
Processes section overheads of STM-16/STM-64 signals.
Transparently transmits and terminates path overheads.
Supports the setting and querying of J0 (to be received) bytes.
Provides transparent DCCs and orderwire byte channels.
Supports SNCP protection.
Supports SNCTP protection.
Supports 1+1 linear MSP protection.
Supports ring MSP protection.
|Specifications (Packet functions)|
|Service bearing media||MultiProtocol Label Switching Transport Profile (MPLS-TP)||Supported|
|802.1Q in 802.1Q (QinQ) link||Supported|
|Ethernet line (E-Line)||
Native ETH service:
Point-to-point transparently transmitted E-Line service
VLAN-based E-Line service
QinQ-based E-Line servic
ETH PWE3 service: PW-based E-Line service (VPWS service)
|Ethernet local area network (E-LAN)||
Native ETH service:
E-LAN service based on the IEEE 802.1d bridge
E-LAN service based on the IEEE 802.1q bridge
ETH PWE3 service: PW-based E-LAN service (VPLS service)
|Jumbo frame||Supports a jumbo frame containing a maximum of 9600 bytes.|
|Maximum frame length (MFL) for a port||9600 bytes.|
|Maintenance features||MPLS-TP OAM||Supported|
|ETH-OAM||Supports Ethernet service OAM.|
|Support for port traffic mirroring|
|Version description of the UNS4 board|
|Board||Product Applicable-System Control Board-Initial Board Version Supported by System Control Board|
|CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, high optical power, T65)-SMF Specifications|
|Line code format||ePDM-QPSK(SDFEC2, wDCM-Metro)|
|Transmitter parameter specifications at point S|
|Center frequency (THz)||191.3 to 196.05|
|Maximum mean launched power (dBm)||2|
|Minimum mean launched power (dBm)||-3|
|Center frequency deviation (GHz)||±2.5|
|Maximum -10 dB spectral width (nm)||0.4|
|Maximum -3 dB spectral width (nm)||0.3|
|Dispersion tolerance (back-to-back) (ps/nm)||12000|
|TX OSNR(in band) (dB)||35|
|Receiver parameter specifications at point R|
|Operating wavelength range (nm)||1529 to 1568|
|Receiver sensitivity (dBm)||-18|
|Minimum receiver overload (dBm)||0|
|Maximum reflectance (dB)||27|
|Typical Power Consumption(W)||
117 (Line Mode) / 114.5 (Regeneration Mode)
|Maximum Power Consumption(W)||
128 (Line Mode) / 126 (Regeneration Mode)
|Dimension (W x H x D, mm)||
193.8 x 40.1 x 205.9
Q: How many hardware version is UNS4 available?
A: The available hardware versions of the UNS4 are TNZ5 and TNZ6.
Q: Can TNZ5UNS4 support SDH and packet services when it is used together with TNZ8XCH board?
A: It supports only OTN features when it is used together with the TNZ8XCH board.
Q: What is RTU-LNSDOCFPP03?
A: It is line Port Enable RTU for 100G CFP Port license; The capacity of CFP port on the UNS4 board is divided into 20G, 40G and 100G. By default, the capacity is 20G, increasing from 20G to 40G, one RTU is required, increasing form 40G to 100G, three RTU are required. But this RTU license is supported only by TNZ6UNS4, not supported on TNZ5UNS4.
Q: What kind of SDH signals does TNZ5UNS4 support?
A: SDH signals supported by TNZ5UNS4 include STM-16 and STM-64. The board supports hybrid transmission of these SDH signals with a maximum bandwidth of 20 Gbit/s.
Q: What is the difference between HSNS4 and UNS4?
A: HSNS4 supports hybrid transmission of OTN and SDH services;
While supports UNS4 Supports hybrid transmission of OTN, SDH and packet services.
- 9 Years Experience
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 9 years. Know more
- Premium Quality Guaranteed
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24 hour pre-delivery test to guarantee premium quality. Know more
- Value over price
What we offer to our customers is value rather than price. We make customers enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
- Tailored Technical Support
We provide customers personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
- One Stop Solution
We provide not only network products but also network proposal, mainstream and cost efficient solution to assist customers eliminate the concerns.
- Official Document Resource
We provide official and extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
- 1 Year Warranty Guaranteed
Our products come with 1 year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
- Fast Global Shipping
We won't stop to develop rapid and cost effective shipping options, provide the excellent experience for our global customers. Know more
- Flexible Payment
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more