![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
TNZ8NS4
Huawei OSN1800V 1-port 100G Line Service Processing Board
20
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei WDM-OTN Equipment Test Procedure
In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)Description
TNZ8NS4 1-port 100G line service processing board
Applied to Huawei OSN 1800V
Supports ESC function
Supports intra-board 1+1 protection (when working with the OLP board)
Supports ODUk SNCP, Tributary SNCP, intra-board 1+1 protection (when working with the OLP board)
Supports Physical Clocks (ODU0/ODU1/ODU2/ODU2e/ODU3/ODUflex)
Supports Electrical-layer ASON and Optical-layer ASON
Supports 1:1 PW FPS, 1:1 PW APS
TNZ8NS4 is a 1-port 100G line service processing board applied to Huawei OSN 1800V. The NS4 board is a line board that supports hybrid transmission of OTN and packet services with a maximum bandwidth of 100 Gbit/s. The NS4 board processes and converts the received service signals into one OTU4 signal carried over an ITU-T G.694.1-compliant DWDM wavelength.
Tech Specs
| Front Panel | ||||
| There are ports on the front panel of the board.
|
||||
| Basic functions | ||||
| Line mode | OTN | 80 x ODU0<->ODU4<->OTU4
40 x ODU1<->ODU4<->OTU4 10 x ODU2<->ODU4<->OTU4 10 x ODU2e<->ODU4<->OTU4 2 x ODU3<->ODU4<->OTU4 ODU4<->OTU4 ODUflex(n=1, 80)<->ODU4<->OTU4 |
||
| Packet | A maximum of 100 Gbit/s packets<->80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4<->1 x OTU4 | |||
| Regeneration mode | – | 1 x OTU4<->1 x OTU4 | ||
| Specifications (OTN functions) | ||||
| Basic functions | Supports conversion of the following signals:
80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4<->1 x OTU4 Supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, and ODUflex signals. |
|||
| Cross-connect functionality | Implements the following service grooming when working with cross-connect boards: 80 x ODU0/ODUflex, 40 x ODU1, 10 x ODU2/ODU2e, 2 x ODU3, 1 x ODU4. | |||
| OTN function | Supports OTU4 interfaces on the WDM side.
Adopts the frame formats and overhead processing methods defined in ITU-T G.709. Supports the SM function at the OTU4 layer. Supports the PM and TCM functions at the ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer, and non-intrusive monitoring of PM and TCM overheads |
|||
| Specifications (Packet functions) | ||||
| Service specifications | Processing capability | 100 Gbit/s | ||
| Service bearing media | MultiProtocol Label Switching Transport Profile (MPLS-TP) | Supported | ||
| 802.1q in 802.1q (QinQ) link | Supported | |||
| Port | Supported | |||
| Ethernet line (E-Line) | Native ETH service:
Point-to-point transparently transmitted E-Line service VLAN-based E-Line service QinQ-based E-Line service
ETH PWE3 service: PW-based E-Line service (VPWS service) |
|||
| Ethernet local area network (E-LAN) | Native ETH service:
E-LAN service based on the IEEE 802.1d bridge E-LAN service based on the IEEE 802.1q bridge
ETH PWE3 service: PW-based E-LAN service (VPLS service) |
|||
| Jumbo frame | Supports a jumbo frame containing a maximum of 9600 bytes. | |||
| Maximum frame length (MFL) for a port | 9600 bytes | |||
| Specifications (Regeneration functions) | ||||
| Basic functions | The NS4 board applies to electrical regeneration sites to provide the electrical regeneration function for optical signals. | |||
| Regeneration rate | OTU4: OTN service at a rate of 111.81 Gbit/s | |||
| OTN function | Supports OTU4 interfaces on the WDM side.
Adopts the frame formats and overhead processing methods defined in ITU-T G.709. Supports the PM and TCM functions at the ODU4 layer, and non-intrusive monitoring on PM and TCM overheads. Supports the SM function at the OTU4 layer |
|||
| WDM-Side Pluggable Optical Module | ||||
| CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, high optical power, T65)-SMF
CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable,high optical power, T69)-SMF CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, T5U)-SMF 100000ps/nm-C band-Tunable Wavelength-ePDM-QPSK(SDFEC2, SLH, T51)-100G CFP 100000ps/nm-C band-Tunable Wavelength-ePDM-QPSK(SDFEC2, wDCM, ULH, T61)-100G CFP |
||||
| Version description of the NS4 board | ||||
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board | |||
| TNZ8NS4 | 1800 V-TNZ5UXCMS/TNZ8XCH-V100R009C00SPC700 | |||
| Mechanical Specifications | ||||
| Typical Power Consumption(W) | 82.7 (line mode) / 79.6 (regeneration mode) | |||
| Maximum Power Consumption(W) | 88.6 (line mode) / 85.7 (regeneration mode) | |||
| Dimension (W x H x D, mm) | 40.1 x 193.8 x 205.9 | |||
| Weight(kg) | 1.75 kg | |||
Additional information
| Weight | 4.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 11.0 cm |
| Bandwidth |
100G |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
| Port |
1-10 |
Q&A
Reviews (2)
2 reviews for TNZ8NS4
Why Thunder-link.com
Raymond
Indonesia
Its box we received with a little damage, luckily the board has no any problem.
Nadjib
Algeria
We need 100Gbit/s bandwidth TNZ8NS4 supports OTN and packet services for our OSN1800V, it arrives at us about 7 days, for now work well.