![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
inquire lead time
Description
UPS5000-A-30 kVA
Online double-conversion UPS that implements digital control and features high efficiency and high power density.
Single UPS supplies power to common loads.
Parallel system supplies power to important loads in small- and medium-sized data centers. It features high availability and strong transient overload capability.
Dual-bus system supplies power to important loads in large- and medium-sized equipment rooms, data centers, and other places that require high reliability.
In addition to advantages of common parallel systems, the dual-bus system is free from bottleneck failures, but its configuration is complex.
Tech Specs
| Item | 30 kVA |
| Cabling mode | Routed from the bottom |
| IP rating | IP20 |
| Communication | Supports the SLOT card expansion port, RS485 serial ports, FE ports, SNMP, and Modbus. |
| Dimensions (H x W x D) | 500 mm x 264 mm x 800 mm |
| Weight | 70 kg |
| Maintenance bypass switch | 750 V AC/80 A/3P |
| Operating temperature | 0°C–40°C |
| Storage temperature | –40°C to +70°C |
| Relative humidity | 0% RH–95% RH (non-condensing) |
| Altitude | 0 m–1000 m |
| When the altitude is greater than 1000 m and less than 4000 m, the rated power should be derated. For details, see the IEC 62040-3. | |
| Input system | Three-phase, four-wire, and PE |
| Rated input voltage | 380/400/415 V AC (line voltage) |
| Input voltage | 80–280 V AC (phase voltage) |
| UPS5000-A-30KTTL/UPS5000-A-40KTTL/UPS5000-A-80KTTL: | |
| 0–40°C: not derated at 176–280 V AC; derated to 40% load at 176–80 V AC | |
| Rated frequency | 50/60 Hz |
| Input frequency | 40–70 Hz |
| Input power factor | > 0.99 at full load; > 0.98 at half load |
| THDi | THDi < 3% (linear load) |
| THDi < 5% (non-linear load) | |
| Remarks: | |
| 1. The preceding specifications are met when the mains input and bypass input share a power source. | |
| 2. The input THDu is less than 1%. | |
| Overvoltage category | OVC II |
| Battery voltage | UPS5000-A-30KTTL/UPS5000-A-40KTTL/UPS5000-A-80KTTL/UPS5000-A-60KTTL/UPS5000-A-120KTTL: |
| 360–528 V DC (12 V batteries, 30 to 44 batteries, 32 batteries by default) | |
| 32–44 batteries: The output power is not derated. | |
| 30 batteries: The output power is derated to 94%. | |
| NOTE: | |
| If the MDU and power versions are earlier than V100R002C01SPC007, the battery voltage is 360–480 V DC (30–40 batteries, 32 batteries by default). | |
| One-click cold start | In the case of a mains failure, batteries can start the UPS to power loads. |
| Battery string sharing | Battery string sharing is supported in a parallel system. No batteries are shared within a UPS by default. |
| Charger output power | Max. 5 kW |
| Charge voltage | Equalized charge voltage: 2.3–2.4 V/cell, default: 2.35 V/cell (30–44 batteries) |
| Float charge voltage: 2.23–2.3 V/cell, default: 2.25 V/cell (30–44 batteries) | |
| Parallel system reliability | Redundancy design for parallel signals |
| ECO function | Supported |
| No-load loss | UPS5000-A-30KTTL (BOM numbers: 02291114 and 02291235), |
| UPS5000-A-30KTTL (BOM numbers: 02290371 and 02311GNW) | |
| Number of parallel UPSs | A maximum of four UPSs can be connected in parallel. |
| Power distribution system | TN-C, TN-S, TN-C-S, TT |
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.