![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock inquire lead time
Description
UPS5000-H-400kVA-NTR-NTR
The UPS5000 is suitable for power systems in various scenarios, including large-scale data centers or communications centers, equipment rooms of large-scale enterprises or financial systems, industrial automated equipment, and scheduling centers.
The UPS uses a modular design. It uses multiple power modules connected in parallel to deliver a high loading capacity.
The UPS5000 consists of a rectifier, inverter, and DC/DC converter.
It converts inputs into pure high-quality sine wave outputs by using the high-frequency switching technology.
Tech Specs
Physical Specifications
| Item | Specifications |
| Cabling mode | Routed in and out from the top |
| IP rating | IP20 |
| Communication | Supports dry contacts, RS485 ports, and FE ports. Supports SNMP and Modbus. |
| Dimensions (H x W x D) | 2000 mm x 800 mm x 1000 mm |
| Weight | < 615 kg |
Mains Input Electrical Specifications
| Item | Specifications | ||
| Rated voltage (line voltage) | 380 V AC | 400 V AC | 415 V AC |
| Rated current (capacity: 400 kVA) | 743 A | 706 A | 680 A |
| Power system | Three-phase four-wire + PE | ||
| Voltage range | 0–30°C: not derated at 323–485 V, derated from 100% load to 45% load at 323–191 V, and derated from 45% load to 35% load at 191–138 V | ||
| 30–40°C: not derated at 342–485 V, derated from 100% load to 45% load at 342–191 V, and derated from 45% load to 35% load at 191–138 V | |||
| Rated frequency | 50/60 Hz | ||
| Frequency range | 40–70 Hz | ||
| Power factor | > 0.99 (100% load) | ||
| > 0.98 (50% load) | |||
| > 0.94 (30% load) | |||
| Harmonic current | THDi < 9% (30% linear load), THDi < 6% (50% linear load), THDi < 3% (100% linear load) | ||
| THDi < 11% (30% non-linear load), THDi < 8% (50% non-linear load), THDi < 5% (100% non-linear load) | |||
| The preceding specifications can be met only when the following conditions are met: | |||
| One power source | |||
| Input THDv < 2% | |||
| Overvoltage category | OVC II | ||
Bypass Input Electrical Specifications
| Item | Specifications | ||
| Rated voltage (line voltage) | 380 V AC | 400 V AC | 415 V AC |
| Rated current (capacity: 400 kVA) | 608 A | 577 A | 556 A |
| Power system | Three-phase four-wire + PE | ||
| Rated frequency | 50/60 Hz | ||
| Frequency range | 50/60 Hz±6 Hz (adjustable with a tolerance of 0.5–6 Hz, ±2 Hz by default) | ||
| Input mode | The mains input and bypass input share a power source (by default) or use different power sources. | ||
| Overvoltage category | OVC II | ||
Battery Electrical Specifications
| Item | Specifications |
| Battery type | Lead-acid battery (VRLA) |
| SmartLi: For the supported version, contact technical support. | |
| Battery voltage (lead-acid battery) | 360–600 V DC |
| 12 V batteries (30–50 batteries, 0 by default) | |
| 40–50 batteries: not derated | |
| 38–39 batteries: derated to 90% | |
| 34–37 batteries: derated to 80% | |
| 30–33 batteries: derated to 70% | |
| 2 V batteries (180–300 batteries, 0 by default) | |
| 240–300 batteries: not derated | |
| 228–239 batteries: derated to 90% | |
| 204–227 batteries: derated to 80% | |
| 180–203 batteries: derated to 70% | |
| NOTE: | |
| The number of batteries is 0 by default and needs to be set based on site requirements. Batteries have no neutral wire, and an odd number of batteries are supported. | |
| When the UPS works in normal mode, if the actual load rate exceeds the threshold that could trigger battery derating, an output overload alarm is generated. | |
| Nominal discharge current (lead-acid battery) | 877 A (480 V, forty 12 V batteries in standard configuration) |
| Maximum discharge current (lead-acid battery) | 1062 A. It is the EOD current of forty 12 V batteries in standard configuration, that is, two hundred and forty 2 V battery cells (1.67 V/cell). |
| Battery cold start | If a utility power outage occurs, batteries can start the UPS to supply power to loads. |
| Charger output power | The maximum charge power is 15% of power of a single module, and the charge current is limited to 30 A. |
| Battery string sharing | Lead-acid battery: Battery string sharing is supported in a parallel system. No battery is shared by default. |
| SmartLi 2.0: Battery string sharing is supported in a parallel system. No battery is shared by default. | |
| SmartLi 3.0: Battery string sharing is not supported. | |
| Charging voltage (lead-acid battery) | Equalized charging voltage: 2.35 V/cell |
| Float charging voltage: 2.25 V/cell |
Output Electrical Specifications
| Item | Specifications | ||
| Rated voltage | 380 V AC | 400 V AC | 415 V AC |
| Current (capacity: 400 kVA) | 608 A | 577 A | 556 A |
| Power system | Three-phase four-wire + PE | ||
| Frequency | In normal mode, the frequency is synchronous with the bypass input frequency. | ||
| In battery mode, the frequency is 50/60 Hz with a tolerance of ±0.05%. | |||
| Voltage distortion | Linear load THDv < 1% (50–100% load balancing) | ||
| Non-linear load THDv < 3% (50–100% load balancing) | |||
| Power factor | 1 | ||
| Transfer time | Double conversion mode: uninterrupted transfer 0 ms; interrupted transfer ≤ 5 ms | ||
| S-ECO mode: 0 ms (supported only by the three-phase four-wire model in the 380 V/400 V/415 V system) | |||
| Output voltage imbalance | Voltage imbalance: ±1% | ||
| Phase imbalance: 120±1° (balanced load and unbalanced load) | |||
| Inverter overload capability | Inverter overload capability for front-to-back airflow: | ||
| 100%< load ≤ 105%: long-term running (ambient temperature ≤ 30°C) | |||
| 100% < load ≤ 105%: transfers to bypass mode after 60 min or longer (ambient temperature > 30°C) | |||
| 105% < load ≤ 110%: transfers to bypass mode after 60 min or longer | |||
| 110% < load ≤ 125%: transfers to bypass mode after 10 min or longer | |||
| 125% < load ≤ 150%: transfers to bypass mode after 1 min or longer | |||
| Load > 150%: The inverter can run for 200 ms or longer. | |||
| Inverter output short-circuit capability | If the initial load rate is less than 40%, twice the rated current can be tolerated for 300 ms (that is, the short-circuit current RMS is 1216 A) in the case of inverter output short-circuit. | ||
| Bypass overload capability | At 40°C: runs 60 min at 110% load, 10 min at 125% load, 1 min at 150% load, and 100 ms at over 150% load. | ||
| Load > 1000%: runs for 100 ms | |||
System Electrical Specifications
| Item | Specifications |
| Parallel system reliability | Redundancy design for parallel signals |
| ECO in a parallel system | Supported |
| No-load loss | 4.5 Kw |
| Number of parallel UPSs | A maximum of six UPSs can be connected in parallel. |
| Power distribution system | TN-C, TN-S, TN-C-S, TT |
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.