Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 1xSTM-64 optical signals, at 40~80km.
Supports the board version replacement function to substitute for the N1SL64.
Supports the detection and query of the information about the optical module.
Supports the ALS function. The optical interface supports the setting of the on/off state of a laser.
Supports the usage and detection of the pluggable XFP optical module.
Supports the VC-12 services, VC-3 services, and VC-4 services.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one channel of ECC communication.
Supports Two-fiber ring MSP. Four-fiber ring MSP. Linear MSP. SNCP. SNCMP. SNCTP protection schemes.
Supports inloops and outloops at optical interfaces.
Supports the PRBS function in the line direction and Cause by Cross function, detects and reports voltage performance.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
SSN4SL64 comes with 1 unit P1L1-2D2 SFP module, transmission distance is 80km. SFP module is not swappable to perform different transmission distance.
The front panel of the SSN4SL64(P1L1-2D2,LC)has indicators, interfaces, a bar code, and a laser safety class label.
|OSN 3500: When cross-connect boards are IXCSA and SXCSA, the SSN4SL64(P1L1-2D2,LC) can be installed in slots 7,8,11,12.|
|The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN4SL64(P1L1-2D2,LC) indicates the type of optical interface.|
|Board||Feature Code||Type of Optical Interface|
|Optical Interface Parameter|
|Nominal bit rate||9953280 kbit/s|
|Line code pattern||NRZ|
|Transmission distance (km)||40 to 80|
|Type of fiber||Single-mode LC|
|Operating wavelength range (nm)||1530 to 1565|
|Launched optical power range (dBm)||0 to 4|
|Receiver sensitivity (dBm)||-24|
|Minimum overload (dBm)||-7|
|Minimum extinction ratio (dB)||9|
|Maximum -20 dB spectral width (nm)||1|
|Minimum side mode suppression ratio (dB)||30|
|Dimensions (mm)||25.4 (W) x 235.2 (D) x 261.4 (H)|
Q: What the difference between different functional version?
A: SL64 is available in three functional versions, namely, N1, N2, and N4. The N2SL64 is discontinued. The difference as below:
|Board version replacement function||Supported||Not supported||Supported|
|TCM function or AU-3 services.||Not supported||Supported||Not supported|
|Pluggable XFP optical modules||Not supported||Not supported||Supported|
|Detects and reports voltage performance||Not supported||Not supported||Supported|
|DWDM colored optical interfaces||Supported||Supported||Not supported|
|CWDM/DWDM colored optical interfaces||Not supported||Not supported||Supported|
|One-fiber bidirectional optical modules||Not supported||Not supported||Supported|
|Output of the standard wavelengths||Supported||Supported||Supported|
Q: What the board substitution relation among different versions?
When the TCM function and AU-3 services are not required, the N1SL64 can substitute for the N2SL64.
When the TCM function and AU-3 services are not required, the N4SL64 can substitute for the N2SL64.
The N4SL64 supports the board version replacement function to substitute for the N1SL64.
Q: What is the difference between different function code?
|Board||Feature Code||Optical Interface||Transmission Distance|
Q: Can I change SFP module to reach longer transmission distance?
A: No, you can't, STM-64 not support SFP module change.
Q: Can I use compatible SFP module on SSN4SL64 board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN4SL6403 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.