A customer LAN network, the using address is 10.10.X.X and subnet mask is 255.255.0.0, and each point equipment did not set up a unified gateway address. When a customer’s new equinoctial is overmuch, local area network (LAN) to reach a certain size, the
WDM stands for wavelength division multiplexing. It’s a technique for combining signals of different wavelengths for transmission through optical lines.
Multicast is group communication where data is addressed to a group of destination hosts simultaneously. Each multicast address represents a multicast group and all hosts in a multicast group can receive the same data.
Now more and more 10GE level transmission requirement, the traditional way, also the only way is to use EAS2 board to access 10GE traffic from Router, and Cross-Connect to STM-64...
The ultra-long-haul optical transmission technology increases the span between optical sites. This will reduce the number of optical relay sites, which can lower engineering cost and OPEX, and improve system reliability.
This post will elaborate on the methods of remote access to ONT via OMCI, TR069 and WAN IP and share some cost-efficient and quality 3rd brand ONT models.
There is a Huawei MA5800 X15 OLT configured with 10GPON & GPON combo card CGHF, can the GPON or 10G GPON channel of CGHF be closed, to work as only a GPON or 10GPON card?
Wi-Fi 6 is the next generation of Wi-Fi. It’ll still do the same basic thing — connect you to the internet — just with a bunch of additional technologies to make that happen more efficiently, speeding up connections in the process.
Huawei provides flexible choices of multi-GE switches, including S6720-SI and CloudEngine S5732-H series, to meet your business needs in various scenarios.
Network address translation (NAT) is an IP address translation technology that allows multiple private network users to share a few public IPv4 addresses to access public networks.