Tag Archives: Switch Routers

A list of power modules for Huawei S5700 Series Switches and some notice during power modules usage.

This article focuses on IPv6 over IPv4 tunnel technology procedures on how to configurate an IPv4 over IPv6 tunnel on ME60 Router

Huawei CE6863 series switch has advanced hardware architecture with 40GE/100GE uplink ports and high density 25GE access ports, can be used to build a scalable network platform in the
cloud computing era, or work as core or aggregation switches on campus networks.

We will provide an example for configuring a ME60 BRAS to obtain an EDSG service policy including limited bandwidths from local configurations

This article gives you an introduction of PoE, PoE+ and PoE++ on Huawei Switch

We always find the similar description from the Huawei switch datasheet, such as: S5720-36C-EI-28S-AC, 28x10/1000Base-X SFP ports, 4x combo 10/100/1000Base-T Ethernet ports, and 4x10G SFP+ ports. Some friends may ask...

You can manage a switch through a web system or a CLI.

The virtual tunnel endpoint (VTEP) then decapsulates the packets and sends the packets to the destination host.

We always notice that word of “RPS” in Huawei switch datasheet, such as S5720-28X-LI, it supports RPS, which means that this switch can connect with a RPS1800 to work normally when its internal power module fails. This article will mainly introduce how to connect RPS supported switch with the RPS1800.

Huawei S5732-H series switch are full-10GE(Multi-GE capable) switches developed by Huawei for the Wi-Fi 6 era, it supports 100M/1G/2.5G/5G/10G Base-T, but the ports support 2.5GE by default, you can purchase RUT (right-to-use) licenses to upgrade the port rate (every 12 ports per RTU license) from 2.5GE to 5GE, or 10GE. This article will mainly introduce the RUT license.