Tag Archives: Switch Routers

To apply a switch in the network, the first step is to get the network switch powered up. There are two power types: AC (alternating current) power and DC (direct current) power for an Ethernet switch, both of which are used for increasing network uptime.

Super Virtual Fabric (SVF) technology virtualizes network devices at multiple layers into a single logical device and allows control devices to manage and configure access devices. This technology simplifies management and configuration.

You can manage a switch through the command-line interface (CLI) or web system.

Various cables play an important role in the healthy operation of Huawei Switches, today we are about to introduce the dedicated stack cables and copper cables.

With the rapid development of the optical communication industry and the increase of demands, the low-speed optical modules in the previous time have been unable to meet the requirements of transmission. Under such circumstances, the 100G optical modules are more and more attentive in the market due to their high speed.

ME60 series router includes ME60-X3, X8, X8A, X16 and X16A, with different slots qty, capacity and performance. Also it has various cards such as control and switching cards SRU SFU, mother card BUSF, service cards BP240 BP100, and NAT cards VSUF160, SP160 etc. This article will briefly introduce the naming rules and specifications comparison of ME60 mainstream cards.

Description on the common license of Huawei NE40E Series Router and license basics

This article will have a detailed introduction to license of Huawei S6730 Series Switch

A list of power modules for Huawei S5700 Series Switches and some notice during power modules usage.

This article focuses on IPv6 over IPv4 tunnel technology procedures on how to configurate an IPv4 over IPv6 tunnel on ME60 Router