The 120-ohm 16xE1 cable is used to receive and transmit E1 signals. The 120-ohm 16xE1 cable is used on the OptiX OSN 1500A or OptiX OSN 1500 B. The 120-ohm 16xE1 cable uses a 2 mm HM connector at one end to connect to the L12S or SSR1PL1B. The other end of the 120-ohm 16xE1 cable is connected to the DDF. The connector needs to be prepared on site as required. Each 120-ohm 16xE1 cable can transmit 16xE1 signals.



Reviews
There are no reviews yet.
There are no reviews yet.