MA5683T chassis with 2xSCUN, 2xPRTE, 1xGPFD C+ Module
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Huawei MA5683T Silver bundle equipped with 2xSCUN, 2xPRTE, 1xGPFD C+ SFP Module
Comes with power cable, accessory
1+1 PRTE equipped, Connect Power Board -48V DC
1+1 SCUN equipped, Switching capacity 480Gbit/s active/standby mode.
1 PCS GPFD 16-Port GPON OLT Interface Board with 16 C+ SFP Module
1 Slot Occupied, 5 Slots Remain
Huawei MA5683T Silver Bundle Configuration, is a recommended board bundle provided by Thunder-link.com, it has most common service type and ordinary ports. You can find other configuration bundle at CONFIGURE page, where you can even configure by yourself by selecting the boards you need. If you need customized configuration, please contact with Thunder-link.com Sales Team, who will come back to you shortly.
|Switching Capacity||480Gbit/s (active/standby mode)|
|Service Slots||1 slot occupied, 5 remain|
|Power Supply||DC: -48V DC|
|Number of Services Equipped||Service Interface||Equipped||Service Interface||Equipped|
|Dimensions (W x D x H excluding mounting brackets)||442.00 mm x 283.20 mm x 263.90 mm|
|Dimensions (W x D x H, including mounting brackets)||535.00 mm x 283.20 mm x 263.90 mm, for ETSI cabinet|
|Working environment temperature||For an indoor cabinet|
Configured with 1 subrack: -25°C to +65°C
Configured with 2 subracks: -25°C to +55°C
Static power consumption 141w
Maximum power consumption 249w
Typical power consumption 195w
|Atmosphere pressure||61 kPa to 106 kPa|
|Altitude||< 4000 m|
Q: What is the difference between MA5683T and MA5603T?
A: MA5603T is multi service based while MA5683T is just OLT, MA5603T can support service like ADSL, VDSL, GPON etc, while MA5683T only supports GPON, P2P etc, but their hardware and configuration command is the same.
Q: What is the difference between MA5683T and MA5680T?
A: The only difference is capacity, MA5683T max support 6 service slots, MA5680T max support 16 service slots. So MA5683T with smaller chassis.
Q: What is the most hot selling Huawei OLT?
A: MA5683T is the best-selling OLT, next is MA5680T.
Q: Do you provide configuration manual to me if we purchase MA5683T from you?
A: Yes, you may contact our sales representative or out support team.
Q: Can I get technical support from thunder-link.com if we purchase MA5683T from you?
A: Yes, thunder-link.com has experienced technical team on Huawei FTTx solution, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
Q: Does MA5683T support AC power?
A: No, only support DC power, but you can purchase a telecom level AC to DC converter if you just have AC power source.
Q: Does the GPON SFP Module included in the bundle?
A: Yes, with GPBD board, 8 B+ SFP Module are included for free.
Q: Can I use MA5683T main control board SCUN as uplink so as to save the uplink board cost?
A: Yes, you can, but we don’t suggest, as Huawei OLT SCUN load balance is not well supported, so most customers are using SCUN in active/standby mode, if OLT lose power, which SCUN will work as the active SCUN will be randomly, which may affect service, also if the link is down, the active SCUN will not shift to the standby SCUN (it will only shift when SCUN board is down), then service may get affected also.
Q: Can I have 1000 Base-T as uplink?
A: Yes, instead of GICF uplink board you can purchase GICG uplink board, if use GICF, you can buy a electrical SFP module then you can have 1000 Base-T.
Q: What is the difference between different GPON board?
|Board||GPON Type||Port Quantity||Optical Module||Maximum Split Ratio||ONU based shaping|
|H802GPBD||1G-GPON||8||SFP (Class B+ and Class C+)||1:128||No|
|H805GPBD/H806GPBD||1G-GPON||8||SFP (Class B+ and Class C+)||1:128||Yes|
|H802GPFD||1G-GPON||16||SFP (Class B+ and Class C+)||1:128||Yes|
|H806GPBH||1G-GPON||8||SFP (Class B+ and Class C+)||1:128||Yes|
|H802XGBC||10G-GPON||4||SFP (Class B+ and Class C+)||1:128||Yes|
Q: Does MA5683T support 10G GPON?
A: Yes, but the bottleneck is the uplink bandwidth.
Q: Can I use a 3rd party ONT with the MA5683T?
A: We don’t suggest so, as the understanding of TR069/OMCI protocol may different between different vendors.
Q: Can I buy 10G uplink board instead of GE?
A: Yes, then you may request our sales quote you X2CS board instead of GICF uplink board, each X2CS provide 2*10G ports.
Q: What is the difference between GPON B+ and C+ GPON transceiver?
|B+ Module||C+ Module|
|Type||One-fiber bi-directional optical module, class B+||One-fiber bi-directional optical module, class C+|
|Operating Wavelength||Tx: 1490 nm|
Rx: 1310 nm
|Tx: 1490 nm|
Rx: 1310 nm
|Port Rate||Tx: 2.49 Gbit/s|
Rx: 1.24 Gbit/s
|Tx: 2.49 Gbit/s|
Rx: 1.24 Gbit/s
|Minimum Output Optical Power||1.50 dBm||3.00 dBm|
|Maximum Output Optical Power||5.00 dBm||7.00 dBm|
|Maximum Receiver Sensitivity||-28.00 dBm||-32.00 dBm|
|Optical Connector Type||SC/PC||SC/PC|
|Optical Fiber Type||Single-mode||Single-mode|
|Reach||20.00 km||20.00 km|
|Overload Optical Power||-8.0 dBm||-12.0 dBm|
|Extinction Ratio||8.2 dB||8.2 dB|
Q: What is the max transmit distance between GPON OLT and ONT?
A: Max 20KM.
Q: Can I use 1:128 split ratio with B+ SFP Module?
A: Yes, but not suggested, most of our customers even use C+ module, are max using 1:64 split ratio.
Q: Do you also offer FTTH tool and accessories?
A: Yes, as a FTTx solution provider, also we offer FTTx accessories like FTTH tool box, optical splitter, terminal box, patch cord, power system etc.