![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
NE40E-X8
Huawei NE40E-X8 DC bundle includes assembly chassis CR5B0BKP0870, 2xSRUA570 200G switch and route processing board, 1xSFU 200G switching board, 4xDC power module
19
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei ME60 System Test Procedure
To ensure Huawei router system we provided works well and customers can plug and play, hardware functionality, main control board version consistency, mother board and daughter board compatibility, all these clause will be tested by Thunder-link.com, befoDescription
Huawei NE40E-X8 assembly chassis CR5B0BKP0870, 2xCR5D0SRUA570 200G switch and route processing board, 1xCR5DSFUIE07C 200G switching board, 4xDC power module.
14U height, 8 LPU slots, maximum 480G/slot bandwidth.
Supports up to 16x100GE port, 16x40GE port or 192x10GE ports.
Switching Capacity: 7.08 Tbit/s.
Forwarding Performance: 2880 Mbit/s.
Product Features
· Ultra-Broadband 2T Board
Industry-leading boards can evolve to 4T and will provide 400G ports in the near future. High-density, compact ports save space and Huawei’s proprietary Solar chipsets and energy-saving technology deliver large capacity and high performance with low power consumption.
· SDN Commercialization
With an SDN architecture, industry-leading Multiprotocol Label Switching (MPLS) and native IP network optimization technologies, NetEngine40E eliminates problems such as uneven traffic distribution, low bandwidth utilization, and low network convergence caused by repeated topology computations in the case of faults.
· Innovative IP Hard Pipe
A major Huawei innovation (RFC 7625), IP hard pipe technology uses existing technologies, such as Multiprotocol Label Switching Traffic Engineering (MPLS TE) and Hierarchical Quality Of Service (HQoS), to guarantee the exclusive Synchronous Digital Hierarchy (SDH)-like hard pipe use of leased line services through hardware resource reservation, ensuring low latency and high reliability.
Comparison of NE40E-X Seriese Router
| Parameters | NetEngine40E-X16A | NetEngine40E-X16 | NetEngine40E-X8A | NetEngine40E-X8 | NetEngine40E-X3A | NetEngine40E-X3 |
| Switching Capacity | 81.92 Tbit/s | 12.58 Tbit/s | 51.2 Tbit/s | 7.08 Tbit/s | 2.76 Tbit/s | 1.08 Tbit/s |
| Forwarding Performance | 14,464 Mpps | 5760 Mpps | 7232 Mpps | 2880 Mpps | 1071 Mpps | 540 Mpps |
| MPU Slots | 2 | 2 | 2 | 2 | 2 | 2 |
| SFU Slots | 4 | 4 | 4 | 3 | / | / |
| LPU Slots | 16 | 16 | 8 | 8 | 3 | 3 |
| Dimensions (H x W x D) | 1778 mm x 442 mm x 650 mm (40 U) | 1420 mm x 442 mm x 650 mm (32 U) | 930 mm x 442 mm x 650 mm (21 U) | 620 mm x 442 mm x 650 mm (14 U) | 264 mm x 442 mm x 664 mm (6 U) | 175 mm x 442 mm x 650 mm (DC 4 U) 220 mm x 442 mm x 650 mm (AC 5 U) |
| Maximum Power Consumption | 9040 W (480G) | 4610 W (120G) 7970 W (240G) |
4770 W (480G) | 2340 W (120G) | 600 W (200G) | 920 W (DC) 1070 W (AC) |
| Weight in Full Configuration | 356 kg (480G) | 246 kg (120G) 279 kg (240G) |
186 kg (480G) | 119 kg (120G) 136 kg (240G) |
75 kg (200G) | 42 kg (DC) 52 kg (AC) |
NE40E Board Type
| Motherboard | Flexible Board | Integrated Board | Versatile Service Unit |
| LPUF-50 CR5DLPUF5070 CR5DLPUF5071 |
P10 CR53-P10-8xPOS/STM1-SFP CR53-P10-2xPOS/STM16-SFP |
LPUI-21 CR5D0EFGFA73 CR5DL1XEDG70 |
VSUF-160 CR5DVSUFD010 |
| LPUF-51 CR5DLPUF5170 CR5DLPUF517E |
P50 CR5D00C8CF71 CR5D00C2CF70 |
LPUI-51 CR5D0L5XFA71 CR5D0EMGFA70 |
VSUF-80 |
| LPUF-120 CR5DLPUFB070 CR5DLPUFB07E |
P51 CR5D0EFGFA70 CR5D0EFGFA70 |
LPUS-53 CR5DL2XEFG72 CR5D00EMGF73 |
SP-80 |
| LPUF-200 CR5DLPUFE070 CR5DLPUFE07B |
P52 CR5D0L5XFE74 CR5D0L2XFE75 |
LPUI-52 CR5D0EKGFA71 CR5DL2XFFG7E |
|
| LPUF-240 CR5DLPUFF070 CR5DLPUFF07E |
P101 CR5D0L5XFA72 CR5D00E1MC70 |
LPUS-101 CR5D00E2MC71 CR5D0LAXFA72 |
|
| LPUF-241 CR5DLPUFF17E CR5DLPUFF170 |
P120 CR5D0L6XFA70 CR5D00T6XF70 |
LPUI-120 CR5D0LBXFA70 CR5D0E2MCA70 |
|
| LPUF-480 CR5DLPUFM070 CR5DLPUFME70 |
P240 CR5D00TBXF70 CR5D00E1NC74 |
LPUI-200 CR5D00E2NC76 CR5D00LEXF76 |
|
| LPUF-481 CR5DLPUFF273 |
P241 CR5D0LBXFE7E CR5D00L1NC7E |
LPUI-240 CR5D00E2NC70 CR5D00LFXF70 |
|
| P480 CR5D0E2NCE70 CR5D00E2NF70 |
LPUI-242 CR5D0E2NBA72 CR5D0E8YFA70 |
||
| P481 CR5D00E2NC79 CR5D00E2NF72 |
LPUI-402 CR5D0E4NBA70 |
||
| LPUI-480 CR5D00E4NB70 CR5D00E4NB7B |
NE40E License Overview
Tech Specs
| Item | Description |
| Switching Capacity | 7.08 Tbit/s |
| Forwarding Performance | 2,880 Mbit/s |
| Number of Slots | 11 slots, including 8 LPUs, 2 MPUs, and 1 SFU |
| Interface Types | 100 GE/40 GE
10 GE-LAN/WAN GE/FE OC-192c/STM-64c POS OC-48c/STM-16c POS OC-12c/STM-4c POS OC-3c/STM-1cPOS Channelized OC-3/STM-1 Channelized STM-4 OC-3c/STM-1c ATM OC-12c/STM-4c ATM E3/T3 CE1/CT1 |
| Processing unit(GHz) | Main frequency:1.5 (SRUA5) |
| SDRAM(GB) | 4 (SRUA5)
16 (SRUB5) |
| CF card(GB) | 4 (SRUA5) |
| IPv4 | Support for static routing as well as dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP-4
Line rate forwarding on all interfaces in complex routing environments, for example, when route flapping occurs |
| IPv6 | Various IPv4-to-IPv6 transition technologies: manual tunnel, automatic tunnel, 6to4 tunnel, GRE tunnel, and ISATAP tunnel
IPv4 over IPv6 tunnel and IPv6 Provider Edge (6PE) IPv6 static routes and dynamic routing protocols, such as BGP4+, RIPng, OSPFv3, and IS-ISv6 IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, tracert IPv6, socket IPv6, static IPv6 DNS, IPv6 DNS server, TFTP IPv6 client, and IPv6 policy-based routing Internet Control Message Protocol Version 6 (ICMPv6), Management Information Base (MIB), User Datagram Protocol Version 6 (UDP6) MIB, TCP6 MIB, and IPv6 MIB L2NAT, NAT444, DS-Lite, and NAT64 |
| MPLS | MPLS TE and MPLS/BGP VPN, in compliance with RFC 2547
Inter-AS VPN Option A/B/C Integration with Internet services Martini and Kompella MPLS L2VPN L2VPN techniques, such as VPLS and VLL IP interworking over heterogeneous media Multicast VPN MPLS-TP, EVPN, Remote LFA |
| Layer 2 Features | IEEE 802.1Q, IEEE802.1ad, IEEE 802.1D, IEEE 802.1w, and IEEE 802.1s
VLAN aggregation (super VLAN) Filtering list based on MAC addresses and ports 1483B |
| Reliability | IP/LDP/VPN/TE/VLL FRR
Protection mechanisms such as IP/TE auto-rerouting, IGP/BGP/multicast route convergence, VRRP, RRPP, IP-Trunk load balancing and backup, BFD, MPLS/Ethernet OAM, Y.1731, and routing protocol/port/VLAN damping PW redundancy, E-Trunk, E-APS, and E-STP In-service patching for smooth software upgrade Passive backplane design Redundancy backup for key components, such as route processing modules, SFUs, and power modules to guard against single points of failure Switching between components that hot-backup each other GR, NSF, NSR, and ISSU Hot swap of all components |
| QoS | Well-designed HQoS and advanced scheduling and congestion avoidance technologies on each LPU
Accurate traffic policing and traffic shaping Complex rule definition and fine-grained flow identification MPLS H-QoS, ensuring QoS for MPLS VPN, VLL, and PWE3 services 8CT that combines MPLS TE and the DiffServ model TE-tunnel-oriented QoS |
| OAM | Y.1731, IP FPM, RFC 2544, MPLS OAM, 802.1ag, and 802.3ah, OPS |
| Multicast | IGMPv1, IGMPv2, and IGMPv3
Multicast routing protocols, including PIM-DM, PIM-SM, PIM-SSM, Multicast Source Discovery Protocol (MSDP), and Multiprotocol BGP (MBGP) Static multicast Multicast CAC Interoperability between multicast protocols Processing of multicast policies based on multicast routing protocols and multicast forwarding Multicast QoS and multicast replication for IPoE access users Two-level multicast replication on the SFUs and LPUs to optimize the multicast effect |
| Security | ACL-based packet filtering
URPF GTSM DHCP snooping ARP attack defense and DoS attack defense MAC address limit and MAC-IP binding Secure Shell (SSH) and SSH version 2 (SSH v2) BGP-Flowspec RIPv2, OSPF, IS-IS, and BGP MD5, SHA256, Keychain |
| Value-added Services | IPsec tunnel
Distributed GRE tunnel Distributed NetStream High-precision NAT: CGN |
| Typical power consumption(W) | 3220 |
| Maximum Power Consumption(W) | 4100 |
| Operating Environment | Long-term operating temperature: 0°C to 45°C
Short-term operating temperature: -5°C to 55°C Long-term operating humidity: 5% RH to 85% RH Short-term operating humidity: 0% RH to 100% RH Operating altitude: 3,000 meters |
| Dimensions(mm) | 620(H)x 442(W) x 650(D) (14U) (chassis main body dimensions)
620(H)x 442(W) x 770(D) (chassis dimensions including the chassis’s front and rear assembly and cable racks) |
| Empty chassis Weight(kg) | 25.8 |
| Full Configuration Weight(kg) | 136 |
Additional information
| Weight | 136.0 kg |
|---|---|
| Dimensions | 77.0 × 44.2 × 62.0 cm |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
Q&A
Q: Which chassis are included in the NE40E series?
A: NE40E series enterprise routers include NE40E-X3, NE40E-X3A, NE40E-X8, NE40E-X8A, NetEngine 40E-X8AK, NE40E-X16, NE40E-X16A. The numbers 3, 8, and 16 represent the number of service slots; The chassis of “A” is an upgraded model without “A”.
Q: How Is the Slot Layout on NE40E-X8?
A:
Q: What prerequisites must be met and what licenses are required in order to use PPPoE/IPoE function on NE40E?
A: The following are the three kinds of licenses that need to be activated.
1, NE40E NetEngine40E BNG Software Package
This license controls L2TP, PPPoE, IPoE, EDSG, and DAA functions on a device.
2, NetEngine40E Subscribers Quantity(1k Subscribers)
This license controls the number of BAS access users. Each license allows the access of 1000 users. This license controls the number of PPPoE users, instead of the number of IPoE users, for BAS access. This license needs to be loaded according to the number of subscribers.
3, NetEngine40E&80E PPPoE/IPoE Function License
Service card (no matter Flexible mother card, daughter card or integrated card) needs support PPPoE/IPoE Function.
Card model with “E” itself supports PPPoE/IPoE, no extra license; card without “E”, relative license is needed to activate PPPoE/IPoE.
In a word, NE40E BNG license is the base, and then make sure service cards support PPPoE/IPoE.
Q: If I use IPoE, do I still need a user license instead of PPPoE?
A: IPoE does not require a license for the number of users.
Relevant Items…
Matching Products…
Reviews (5)
5 reviews for NE40E-X8
Why Thunder-link.com
Kalajzic
Cuba
We plan to buy another NE40E-X8 device from you this year.
Marisela
Venezuela
We have to expand 100G service, so we choose upgrade NE40E-X3 to X8, thunder provides us good suggestions.
Jairo
Peru
Thunder-link sent us cost-efficient and appreciate NE40E solution which fully meet our requirement even with regards to future capacity expansion.
Bradley
South Africa
Got it. Excellent job of packing! Everything works perfectly! Thanks!
Tourinho
Brazil
Can I get 1588v2 function license on NE40E-X8?