Huawei Network Products One Stop Shopping, Global Delivering.
| | |
MA5600T Series Equipment Downgrade Guidebook

MA5600T Series Equipment Downgrade Guidebook

Topcis:
,

The aim of this paper

HUAWEI MA5600T series equipment, due to its stability and ease of operation, and favored by the users of all countries.

Over time, constantly updated, the new factory equipment is the latest mainstream version of the market or the market.

Its compatibility can sometimes be greatly affected, so it is necessary to downgrade the operation at certain times.

This article will be degraded some points to describe, if you need more information, please contact our sales team and technical team.

 

The premise of operation

0. Please backup all the configuration of the original equipment, and do not directly to operate the current network equipment, so as not to be unable to quickly restore the business situation.

1.Access to the objective version system bin file.

2.Access to the purpose of version system IO package bin file.

3.Using Console to connect OLT main control board, and operate Console monitor routine terminal on PC, and check the running status of the OLT system.

4.Using Ethernet cable to connect OLT main control board ETH port and PC, and configure the same network.

5.Configured TFTP server software, and put the bin file into the directory, and downloading.

 

Main Downloading process

1.Downgrade bin file

Downgrade bin file.png

Downgrade bin file.png

 

2.Loading system bin file

Board IP address   : [10.11.104.2] 

Board mask address : [255.255.255.0] 


TFTP server IP     : [10.11.104.1] 10.11.104.208


File name         : [scuxxx_packet.bin] v8r11.bin

You will download file 'v8r11. bin' from TFTP server 10.11.104.200, are you sure? (y/n) [y]

 

3.Start-up system recovery

Start-up system recovery.png

 

Begin to save io_10gepara.efs...OK.

Begin to save patch_bak.efs...OK.

Packet file load and save OK!

After downloading the bin file, the download file will be loaded, as the above hints, the file already loaded, system will appear the interface as below.

system.png

system.png


After entering config mode, you can check the version of software by using display version command .


Notice :

The degradation operatation is very prudent, please backup device configuration before operate, and can not directly operate the network, which has a large number of business equipment.


You have added

to your shopping cart

MA5600T Series Equipment Downgrade Guidebook
MA5600T Series Equipment Downgrade Guidebook
Topcis:
,

The aim of this paper

HUAWEI MA5600T series equipment, due to its stability and ease of operation, and favored by the users of all countries.

Over time, constantly updated, the new factory equipment is the latest mainstream version of the market or the market.

Its compatibility can sometimes be greatly affected, so it is necessary to downgrade the operation at certain times.

This article will be degraded some points to describe, if you need more information, please contact our sales team and technical team.

 

The premise of operation

0. Please backup all the configuration of the original equipment, and do not directly to operate the current network equipment, so as not to be unable to quickly restore the business situation.

1.Access to the objective version system bin file.

2.Access to the purpose of version system IO package bin file.

3.Using Console to connect OLT main control board, and operate Console monitor routine terminal on PC, and check the running status of the OLT system.

4.Using Ethernet cable to connect OLT main control board ETH port and PC, and configure the same network.

5.Configured TFTP server software, and put the bin file into the directory, and downloading.

 

Main Downloading process

1.Downgrade bin file

Downgrade bin file.png

Downgrade bin file.png

 

2.Loading system bin file

Board IP address   : [10.11.104.2] 

Board mask address : [255.255.255.0] 


TFTP server IP     : [10.11.104.1] 10.11.104.208


File name         : [scuxxx_packet.bin] v8r11.bin

You will download file 'v8r11. bin' from TFTP server 10.11.104.200, are you sure? (y/n) [y]

 

3.Start-up system recovery

Start-up system recovery.png

 

Begin to save io_10gepara.efs...OK.

Begin to save patch_bak.efs...OK.

Packet file load and save OK!

After downloading the bin file, the download file will be loaded, as the above hints, the file already loaded, system will appear the interface as below.

system.png

system.png


After entering config mode, you can check the version of software by using display version command .


Notice :

The degradation operatation is very prudent, please backup device configuration before operate, and can not directly operate the network, which has a large number of business equipment.


Related Product
MA5680T 8GPON C+ bundle
MA5680T 8GPON C+ bundle
MA5680T chassis with 2xSCUN, 2xPRTE, 1xGPBD C+ SFP Module..
US $--
MA5683T 16GPON C+ bundle
MA5683T 16GPON C+ bundle
MA5683T chassis with 2xSCUN, 2xPRTE, 1xGPFD C+ SFP Module..
US $1,580.00
MA5680T 2 GE 2 10GE 48GPON C+ bundle
MA5680T 2 GE 2 10GE 48GPON C+ bundle
MA5680T chassis with 2xSCUN, 2xPRTE, 1xGICF, 1xX2CS, 3xGPFD C+ SFP Module..
US $--