Huawei MA5600T Series OLT LACP Configuration Guide
Link Aggregation Control Protocol (LACP) is the control protocol for implementing the link aggregation in the IEEE 802.3ad standard.
Link Aggregation Control Protocol (LACP) is the control protocol for implementing the link aggregation in the IEEE 802.3ad standard.
In Huawei OLT system, Huawei ONT (Huawei EG8141A5, Huawei HG8546M…) can be added online or offline through the automatic discovery function, which requires relevant commands.
This document describes the operation of GPON service board (such as GPBD/GPFD and so on) commonly used command on OLT.
The OLT is connected to the remote bridging ONT through a GPON port to provide users with the VoD service.
The global configuration of link aggregation and queue scheduling based on priorities ensures service reliability. The global configuration of security policies ensures service security.
Many ISP customers want to use U2000 NMS to manage Huawei MA5600T, MA5800 series OLT. But U2000 is more complex than command line, some customers do not know how to do configurations and modify data on MA5600T MA5800 via U2000, here is a guidance of how t
This article we are going to show you how to set the Layer 2 Isolation on Huawei U2000.
DHCP Option 82 is a user security mechanism, which encapsulates the user access information obtained by access devices through relay agent info option (RAIO) into the Option 82 field of the DHCP request packets sent from a user.
Services can be configured for an optical network unit (ONU) only after the ONU is added to an optical line terminal (OLT).
This document describes how to activate a VDSL2 port on VDLE board and bind a VSDL2 line profile to the port.
After the inband management channel between the OLT and the ONU is configured and available, you can log in to the ONU from the OLT to configure the ONU.
When Huawei OLT MA5680T access a base station that requires only frequency synchronization, and when MA5680T are connected upstream to the Huawei SDH OSN 3500 or OSN7500 network by using the E1/STM-1 port, the E1/STM-1 line clock can be used for clock syn